Filter
Top Products
Appendix B • Installing the indoor equipment using dial-up commissioning
1033295-0001 Revision 2
69
Appendix B
Installing the indoor equipment using
dial-up commissioning
System pre-installation
Check to be sure both you and the customer have fulfilled all
system and site requirements before beginning installation.
Installation PC requirements
The installer laptop PC must fulfill the following requirements.
You will receive network parameters during installation.
• Ethernet enabled network interface card (NIC) and Ethernet
cable
• Windows 98 SE, Windows Me, Windows 2000, or Windows
XP with TCP/IP configured to automatically obtain IP
addresses. Appendix D – Configuring the installer laptop for
IP addressing, on page 121.
• Customer PC qualification tool disk or CD.
• Dial-out modem.
• Installer software installed. See Installing DIRECWAY
installation software on installer laptop on page 73.
Customer installation
requirements
The customer must have or provide:
• Operating system
– PC: Windows 98 SE, Windows Me, Windows 2000,
Windows XP
– MAC: 9.0 - 10.2 (excludes 10.0)
• Processor
– PC: Pentium II 333 Mhz or faster
– MAC: 300 Mhz or faster
• Memory
– PC: 64MB RAM, Windows 98SE and Me; 128MB RAM
Windows 2000 and XP.
– MAC: 128MB
• Free hard drive space
– PC: 100MB
– MAC: 150MB