Filter
Top Products
Chapter 4 • DW6000 LEDs and troubleshooting
1033295-0001 Revision 2
59
Check receive signal
The DW6000 will not function if satellite signals are not received
properly.
1. At the Control Center, click on the
Reception Info indicator.
The Reception Info screen appears. See Figure 56.
2. In the
Receive Status row, check the Rx Code.
If the Rx Code is
The receiver is operational
(RxCode 5)
the DW6000 is receiving signals properly.
Proceed to the next troubleshooting step.
If any other Rx Code appears, the DW6000 is not receiving
signals properly. Click on the Rx Code. Follow the
troubleshooting procedure that appears.
Check transmit signal
The DW6000 will not function if satellite signals are not
transmitted properly.
1. At the Control Center, click on the
Transmission Info
indicator. The Transmission Info screen appears. See
Figure 57.
2. In the
Transmit Status row, check the Tx Code.
Figure 56: Reception info