Chapter 1 • Introduction
4
1033295-0001 Revision 2
Specifications and
identification of
equipment
The part number label is located on the rear of the unit.
Table 1 lists the specifications of the DW6000.
Table 2 shows the cable requirements for the unit. The cable
requirements are the same regardless of the type of antenna used
and are determined by the distance from the DW6000 to the
satellite antenna.
Table 1: DW6000 Specifications
Product Element Specification
Weight 2.4 lb (1.089 kg)
Width 1.7 in (4.32 cm)
4.5 in (11.43 cm) with pedestal base
Height 9.5 in (24.13 cm)
9.75 in (24.77 cm) with pedestal base
Depth 10.5 in (26.67 cm)
Power supply PN 1031105-0001 Rev A
Electrical requirements
• Input line voltage
• Input line frequency
• Current required
• Power consumption
100 - 240 V - 2A max
50-60 HZ AC
100 W typical
64 W
Power cords Detachable power cord for 110 VAC
outlet type
Safe operating tempera-
ture range
0 to 40 degrees C (above 5000 feet alti-
tude, reduce maximum temperature by
1 degree C per 1000 feet)
Safe operating humidity 5% to 95% non-condensing
Safe altitude 10,000 ft.
Cooling method Convection
Ports • One Ethernet LAN port supporting
10BaseT or 100BaseT operation,
RJ45 switched
• Telephone line port (DW6020 only)
Main processor • 133 Mhz
Main memory • 32MB
Flash memory • 8MB
Protocol Support TCP/IP protocol suite