Filter
Top Products
Chapter 2 • Installing the indoor equipment
22
1033295-0001 Revision 2
8. Verify the information and select Next. The Receive Antenna
Pointing screen appears. See Figure 21.
Click on
Display Signal Strength to see the signal quality
factor (SQF). When the signal is locked, a checkmark appears
in the
Perform ACP checkbox. Peak the receive pointing as
instructed in the antenna installation manual. Click
Close.
See Figure 22.
Remember that the signal may be locked but not necessarily
peaked. That is why you must carry out the instruction to
peak the signal.
9. Click Next. The
Transmit Antenna Pointing screen appears.
See Figure 23.
Note: The Signal Quality window may not appear on top.
Just minimize the other windows until you can see it.
Figure 21: Receive Pointing