Filter
Top Products
Appendix B • Installing the indoor equipment using dial-up commissioning
76
1033295-0001 Revision 2
Installing the DW6000
using a modem
You need all the items shown in Figure 60. Everything but the
Ethernet cable is in the DW6000 installation kit or inside the
antenna box.
If Web commissioning is not available, you must Hyperterminal
to access the installer console and use it to configure the unit. See
Appendix C – Installing the DW6000 using Installer Console, on
page 95.
You will also need the installation specification or work order.
This is provided to you by HNS.
It is important to understand that there are four service options:
consumer, small office/home office, enterprise, and GM
Teleworker (not in use). Each option has its own registration
server that appears in the Websetup Welcome screen when you
start Websetup to register a customer.
You must choose the consumer option when commissioning a
DW6000. If in doubt consult the work order.
For example, if you are installing a DW6000 you would
double-click on the registration server for a consumer installation.
If you click on one of the other servers, you will not be able to
install the customer correctly.
It is also important to understand that when the Antenna Pointing
screens first appear in Websetup, you must place a check in the
checkbox to confirm you are performing a DW6000 installation.
Qualify customer PD with
qualification tool
Insert the disk containing the customer PC qualification tool in
the customer computer. Run all the checks in to tool to ensure the
customer’s computer is set up to work with the DW6000.
The tool does not work on a MacIntosh computer.