Filter
Top Products
Appendix C • Installing the DW6000 using Installer Console
104
1033295-0001 Revision 2
d. Go to File
→
Properties. The New Connection Properties
window appears.
e. Click the
Settings tab. See Figure 96.
f. Click ASCII Setup. The ASCII Setup window appears.
See Figure 97.
g. Place a check in the
Echo Typed Characters Locally
checkbox.
h. Click OK twice to close the
Properties window. The
HyperTerminal session is set up.
Figure 95: Connect To
Note: When you are finished with a HyperTerminal
session, enter
Z in the Main Menu to close the session on the
DW6000. DO NOT close HyperTerminal without ending
the session on the DW6000. If you do, the unit will freeze
for a few minutes.