Filter
Top Products
Chapter 2 • Installing the indoor equipment
14
1033295-0001 Revision 2
Assemble DW6000 and
attach to computer
1. Take the pedestal base in one hand and the DW6000 in the
other. Orient them as shown in Figure 7. The Power LED will
be at the bottom.
2. The pedestal base has two curved ridges, one on each side of
its opening. See Figure 8. The DW6000 has six guides that
slide along these ridges. See Figure 9. Locate the ridges and
the two guides at the front of the pedestal base.
3. Align the guides with the ridges.
4. Gently slide the guides along the ridges until the DW6000
clicks into place.
S
Note: If you need to remove the DW6000 from the pedestal
base, pull up and back on the tab on the back of the base. See
Figure 10. You can then slide the base off the DW6000.
Figure 7: Orienting pedestal base and DW6000