Filter
Top Products
NetWare Version 3.x RPRINTER Setup
181
23. Select the queue defined and press ENTER.
24. When prompted for a priority, press ENTER to select the
default or select a priority.
25. Click ESCAPE until you have exited PCONSOLE.
26. Reload the PSERVER.NLM that the Ethernet Interface is to
service as an RPRINTER.
27. Repower the Ethernet Interface by turning the printer off and
then back on.
28. Wait two minutes and then check your PSERVER to see if the
appropriate printer is being serviced. The PSERVER should
indicate that the printer is “Waiting for job.”
At this point, the Ethernet Interface knows to receive any jobs this
PSERVER.NLM has to send to it through the defined printer.