Filter
Top Products
Chapter 6 Novell Host Configuration
182
NetWare Version 4.
x
and 5
.x
PSERVER Setup
Ethernet Interface destinations are case sensitive and will not be
recognized if they are typed incorrectly. By default, they are all
lower case. If you are setting up a NetWare 4 environment, the
destination must be renamed to uppercase to match the
PCONSOLE entry.
The Ethernet Interface can be used in a NetWare 4 or 5
environment with either of the following options:
• Set the Ethernet Interface up as a PSERVER, replacing a
dedicated printer.
• Set the Ethernet Interface up as an RPRINTER, interacting with
an existing PSERVER (see page 185).
NOTE: Following a PSERVER setup, bindery emulation is
required.
To configure the Ethernet Interface as a PSERVER in a NetWare 4
environment:
1. Log in to the Novell as supervisor.
2. Enter PCONSOLE.
3. Press F4.
4. Select PRINT QUEUES.
5. Press INSERT to add a queue.
6. Type in a new queue name and press ENTER.
7. Press ESCAPE.
8. Select PRINT SERVERS.
9. Press INSERT to add the new print server.