Filter
Top Products
Chapter 7 Novell Ethernet Interface Configuration (10/100Base-T)
196
Print Server Setup - HTML Method
1. Load a Web browser on a network station that can
communicate with the print server over TCP/IP.
2. Direct your Web browser to URL:
http://EthernetInterfaceIPaddress/
networkConf.html
(e.g., http://192.75.11.9/networkConf.html).
NOTE: If prompted for a “User ID” and password first, type
root
for
the ID and press ENTER at the password prompt (since
there is no password by default).
3. Look under the “Novell” section and add the new password to
the “Pserver Password” field.
NOTE: The passwords entered in Netware Administrator or
PCONSOLE must match the password set on the unit.
4. Click the SUBMIT button when done and physically repower
the printer to make the new settings take effect.
Print Server Setup - Manual (Telnet) Method
1. Telnet to the print server:
telnet ipaddress
NOTE: If prompted for a “User ID” and password first, type
root
for
the ID and press ENTER at the password prompt since
there is no password by default.
2. You should see a prompt with the Ethernet Interface IP
address:
ipaddress:root>
3. At the prompt, enter:
store pserver novell passwd password
NOTE: The passwords entered in Netware Administrator or
PCONSOLE must match the password set on the unit.
4. Reset the unit to ensure the changes take effect:
reset