Filter
Top Products
NetWare Version 4.x and 5.x RPRINTER Setup
187
6. Open a Telnet or npsh session and log into the Ethernet
Interface. Wait a minute or two, then use the
list rprinter
command, and you should see your entries. You could also do
this by looking at the connection status on the
4.
x
or 5
.x
PSERVER printer status entries.
7. If you add, delete, or change RPRINTER entries on the
Ethernet Interface or
4.
x
or 5
.x
console, you should always
unload and reload the pserver.nlm module to register the
changes. The Ethernet Interface can be configured and ready
before the pserver.nlm is reloaded, or the Ethernet Interface
can be reset after pserver.nlm is reloaded.
8. A Web browser can also be used to see the RPRINTER
attachments and status.
Novell Troubleshooting Tips
This section provides information on possible solutions to some
standard configuration errors. If you require technical support,
please have as much of the following information available when
you call:
1. Level of software are you running.
2. Type of attachment do you have.
3. Your host operating system.
4. A detailed description of the problem.
5. When and how often the problem occurs.
6. A detailed description of your network and the components
attached.
Please follow these tips to determine what the problem may be with
your Ethernet Interface configuration.
Novell Troubleshooting Tips