Filter
Top Products
Changing The Ethernet Interface Mode (NDS and Bindery Setups)
201
4. Reset the unit to make the changes take effect:
reset
Changing The Ethernet Interface Mode
(NDS and Bindery Setups)
The Ethernet Interface allows you to store a particular mode for the
unit to operate in. This will be either NDS, Bindery, or autosense. If
you use autosense, the Ethernet Interface will first attempt to log in
to an NDS file server and, if it fails, will try to log in to a Bindery file
server.
NOTE: If you are using both NDS and Bindery file servers in your
setup, set the mode to auto.
HTML Method
1. Load a Web browser on a network station that can
communicate with the print server over TCP/IP.
2. Direct your Web browser to URL:
http://EthernetInterfaceIPaddress/
networkConf.html
(e.g., http://192.75.11.9/networkConf.html).
NOTE: If prompted for a “User ID” and password first, type
root
for
the ID and press ENTER at the password prompt (since
there is no password by default).
3. Look under the “Novell” section and go to the “Service Type”
field to select the appropriate mode.
4. Click the SUBMIT button when done and physically repower
the printer to make the new settings take effect.