Filter
Top Products
Chapter 16 Complete Command List
330
WIRELESS
ADAPTER,
WIRELESS
Define a auth-user-name to be used in the LEAP operation:
store ifc <ifnum> wlan user <auth-user-name>
This auth-user-name needs to match the user name entered in
the LEAP Access Point.
WIRELESS
Define a auth-password to be used in the LEAP operation:
store ifc <ifnum> wlan pass <auth-password>
This auth-password needs to match the password entered in
the LEAP Access Point.
WIRELESS
Set the network name (SSID):
store ifc <ifnum> wlan ssid <network-name>
<ifnum> is the interface number for the WLAN interface.
<
network-name
>
is a 1 to 32 ASCII character string.
WIRELESS
ADAPTER,
WIRELESS
Set network mode:
store ifc <ifnum> wlan mode adhoc|pseudo|managed
<net-mode>
<
ifnum
>
is the interface number for the WLAN device.
<net-mode> is the type of network operation mode: “adhoc,”
“pseudo” or “managed.” “pseudo” stands for pseudo IBSS
(Proprietary adhoc).
WIRELESS
ADAPTER,
WIRELESS
Set transfer rate (speed):
store ifc <ifnum> wlan speed auto|<1 2 5 11>
<
ifnum
>
is the interface number for the WLAN device.
<1 2 5 11> are the speeds being selected. They are entered as
a list of integers, separated by 'space' characters. The following
values are supported: 1 for 1Mbps, 2 for 2Mbps, 5 for 5.5Mbps,
and 11 for 11Mbps. Using the word “auto” instead of any
number will set the card to use automatic negotiation.
WIRELESS
ADAPTER,
WIRELESS
Set channel number:
store ifc <ifnum> wlan channel default <1-15>
<
ifnum
>
is the interface number for the WLAN device.
<1-15> selects the RF channel number (1 to 15) used in ad-hoc
mode. The word “default” will inform the device driver to use the
card's factory set default channel.