Filter
Top Products
Store Commands
341
store tcpip tcp access [root] add|del <network>
[<netmask>]
Example:
store tcpip tcp access add 192.75.11.25
Add or remove an entry from the Ethernet Interface TCP
access list defined by <network>. If the list has an entry, only
this host can print to and remotely interact with the print server.
store tcpip from default|current
Example:
store tcpip from default
Set all TCP/IP network settings back to factory defaults.
Example:
store tcpip from current
Store all current TCP/IP network settings to flash memory so
they are retained after a power cycle. This ensures all current
settings match what is stored in flash memory.
store tn dest <dest> connect <resourcename>
Example:
store tn dest d1prn connect MYRESNM
Store the resource name for the host session. The resource
name must be the same as the name of the printer device
created on the host for the session.
Default: Unconfigured (empty) resource name
store tn dest <dest> mode 5250|3270
Example:
store tn dest d1prn mode 3270
Store the TN protocol mode.
Default: 5250
store tn dest <dxprn> host <IPaddress>
Example:
store tn dest d1prn host 192.75.11.1
Store the IP address of the TN5250/3270 host
Default: Unconfigured (empty) IP address
store tn dest <dxprn> port <portnum>
Example:
store tn dest d1prn port 27
Store the UDP port number of the TN server.
Default: 23