Filter
Top Products
Chapter 7 Novell Host Configuration (10/100Base-T)
204
3. Look under the “Novell” section and enter the preferred tree in
the “NDS Preferred Tree” field.
4. Click the SUBMIT button when done and physically repower
the printer to make the new settings take effect.
Manual (Telnet) Method
1. Telnet to the print server:
telnet ipaddress
NOTE: If prompted for a “User ID” and password first, type
root
for
the ID and press ENTER at the password prompt (since
there is no password by default).
2. You should see a prompt with the Ethernet Interface IP
address:
ipaddress:root>
3. At the prompt, enter:
store pserver novell tree tree
4. Reset the unit to make the changes take effect.
reset
Novell Host Configuration (10/100Base-T)
ADAPTER,
WIRELESS
ADAPTER
This section covers PSERVER and RPRINTER/NPRINTER setups
on the Ethernet Interface. The Ethernet Interface can handle up to
eight RPRINTER/NPPRINTER setups.
Although the entire print setup is done through Netware
Administrator or PCONSOLE, you may need to communicate
directly with the print server in order to modify settings, monitor the
unit, etc.
For Netware 4.
x
and Netware 5.
x
environments, you can obtain a
NWAdmn3
x
snap-in program called MPAdmin. This snap-in can be
used to configure PSERVER setups as well as additional settings
on the Ethernet Interface.