Filter
Top Products
Current Log Path Settings
99
Email Address
Specifies an e-mail address to which alert information will be sent.
Short E-mail Format
Specifies whether a short (15-80 character) alert e-mail message
should be sent.
If enabled, the message will contain the alert description, the
severity level, the device description, and device name (unless the
length of the message exceeds the Short E-mail Message Length,
in which case the message will be truncated).
If disabled, the message will contain additional information
including the device description, device name and location, alert
description, alert group, alert severity level, and printer status.
Default:
Disabled
Short E-mail Message Length
Specifies the maximum size of the short e-mail message.
Acceptable values are 15 to 80 characters.
Default:
80 characters
Send Test Message
provides a way to test the validity of the e-mail address/SMTP
server address. If checked, a test message will be sent to the
specified e-mail address when the submit button is pressed.
Default:
All alert groups are disabled by default.
If the alert message is to be sent to a cellular phone or pager, the
Short Email Format option should be enabled. Once this option is
enabled, you may specify the maximum e-mail message length
(15-80 characters). When enabled, the message will contain the
alert description, the severity level, device description, and device
name (unless the length of the message exceeds the Short Email
Message Length, in which case the message will be truncated).
SNMP Configuration