Filter
Top Products
Chapter 9 Configuring On iSeries As An IPDS Printer
252
k. User-Defined Object (USRDFNOBJ)
To use a PSF configuration object, specify its name and
library here. This object type must be *PSFCFG. For V3R7
and higher, a single PSF configuration object may be
referenced by multiple device descriptions, if required.
Configuring PSF for IPDS On V4R2 And Above
To configure IPDS on the iSeries V4R3, use the following
commands:
• CRTDEVPRT
• CRTPSFCFG (Optional)
Configuring AFP with CRTPSFCFG on V4R3 and
above (Optional)
To configure the iSeries for IPDS printing on V4R3:
1. At the iSeries command line, enter a command in the form:
CRTPSFCFG PSFCFG(AFP/NETPRT6500-v) IPDSPASTHR(*YES)
RLSTMR(*SEC15) TEXT(‘IBM 6500-v NETWORK ATTACHED
PRINTER’) PAGSIZCTL(*YES) ACTRLSTMR(*NORDYF)
2. A completed screen looks like Figure 33.