Filter
Top Products
327
16 Commands
Command Shell Overview
The Ethernet Interface comes with an in-depth command shell
called npsh. It allows you to manipulate objects like destinations,
I/O ports, and models and provides monitoring and troubleshooting
capabilities.
npsh Access Methods
This command shell can be accessed by:
• built in HTML forms
• a Telnet session from a TCP/IP host to the Ethernet Interface
• a single remote shell command (e.g., rsh, rcmd, remsh) from
a TCP/IP host
Main npsh Command Prefixes
All configurable commands either start with store or set, and
view commands start with list.
NOTE: If the store prefix is used, the Ethernet Interface must be
repowered to make the changes take effect. Since store
affects flash memory settings only, the print server must
reset and read the new settings now in flash memory.