Filter
Top Products
Operator’s Guide
Changing the Order Configuration
To change the configuration for an entire order, you must make the changes before
you insert the film. You can make edits to the existing configuration or you can
choose a different configuration.
NOTE: You cannot change the configuration of an order that is being processed.
Editing the Current Configuration
1. Before the film is inserted, touch Change Config. in the selected print mode
screen.
2. Change the settings as desired and touch OK. (See Chapter 4 for descriptions of
these settings.)
The new settings are applied to the current order.
6-16 KODAK PROFESSIONAL SRP 30 Laser Printer