Filter
Top Products
Correcting System Conditions
1
3
2
4. Release the two locking levers (1) and open the bottom belt assembly (2).
5. Remove the paper from the print roller (3).
6. Check that all belts of the lower belt assembly and the print drum are positioned
correctly on the rollers.
7. Close the bottom belt assembly.
Paper Jams between the Transport Unit and the Lane
Distributor
1
2
1. Open the right-hand printer door.
2. Loosen the red locking screw (1) and pull the lane distributor out on the
telescopic rails.
3. Turn the hand wheel (2) at least 10 turns to advance the sheet into the lane
distributor.
KODAK PROFESSIONAL SRP 30 Laser Printer 7-17