Filter
Top Products
Maintenance
Changing the Scan Lamp
Necessary tools:
• Lint-free cloth
WARNING: The lamp and the lamp house get very hot.
1
1. Push the lamp house cover (1) slightly to the front until it snaps open and the
lamp is switched off.
2. Wait a few minutes to let the lamp cool.
3. Open the lamp house cover fully. It opens to the front and locks into the rods of
the holder.
CAUTION: Do not bypass the lamp switch when the lamp mount is folded
up. The light falling straight down will damage the filter paddles.
KODAK PROFESSIONAL SRP 30 Laser Printer 8-37