Filter
Top Products
Operator’s Guide
Weekly Maintenance
Removing Dust from the Film Mask
Clean the film mask with compressed air.
Cleaning the Film Take-Up
Purpose: To remove dust and film abrasions that are deposited on the inserted films,
which may have a negative impact on the print result.
P225_0004AC
1
1. Remove the film take-up (1).
2. Open the film take-up. Pull the metal clip (1) to the front and separate both parts
(2).
3. Remove dust and film abrasions with a lint-free cloth.
4. Close and reinstall the film take-up.
8-10 KODAK PROFESSIONAL SRP 30 Laser Printer