Filter
Top Products
Operator’s Guide
Resetting the Equipment
There are three methods for resetting the SRP 30 Laser Printer:
• Using the Film stop key on the scanner
• Using the Stop button on the screen
• Using the ON key on the scanner
Reset Using the Film Stop Key
1 ON key
2 Timer lamp
3 Film stop key
1. Press the Film stop key (3) to stop the film advance during the scanning.
The system stops all motors of the film drive immediately and opens the Reset
pop-up window containing Yes and No buttons.
IMPORTANT: Before continuing, wait until the paper transport in the printer is
empty. Otherwise, there is the risk of a paper jam.
To verify that the paper transport is empty:
• Check that no sound is coming from the printer.
• Touch i and check the position of the prints using the Info function.
2. When all of the prints are in the paper processor, touch Yes to start the reset.
7-4 KODAK PROFESSIONAL SRP 30 Laser Printer