Filter
Top Products
Maintenance
Changing the Chemical Filters
WARNING: Wear protective gloves and goggles during all cleaning
operations when there is potential to come in contact with
chemicals.
1. Open the wet section cover. (For important safety information, see Opening and
Closing the Wet Section Cover on Page 8-20.)
2. Remove the six chemical filters and put them in a lab tray.
3. Pull the used filter cartridges off the shaft and install the new filter cartridges.
Dispose of the filters by following procedures specific to your lab. See Disposal of
Chemicals and Containers in Regulatory and Safety Information.
4. Rinse the filters in water to remove loose fibers.
5. Reinstall the chemical filters in the color-marked order.
KODAK PROFESSIONAL SRP 30 Laser Printer 8-39