Filter
Top Products
Maintenance
Door to the Print Engine
NOTE: The filter is mounted on the housing of the exposure gap fan on the inside of
the print engine door. The filter holder is fastened to the housing by 2 black
locking screws (1).
1. Loosen the locking screws (1) and remove the filter holder (2).
2. Wash the filter mat in warm water.
CAUTION: Do not bend or wring the filter mat. Broken fibers may be blown
into the print engine.
3. Remove all water and insert the dry filter mat in the filter holder.
4. Fasten the filter holder.
KODAK PROFESSIONAL SRP 30 Laser Printer 8-35