Filter
Top Products
Operator’s Guide
Print Engine
1. Release the two locking levers (1) and pull the print engine (2) out on the
telescopic rails.
2. Press the toggle on the upper guide plate (1) and remove the plate.
3. Pull down on the back of the lower guide plate (2) and remove the plate.
4. Remove the paper dust from the print engine and both guide plates with a
vacuum cleaner.
5. Reinsert both guide plates. (For the lower guide plate, insert at an angle and
press firmly up and in until the plate locks in place.)
8-14 KODAK PROFESSIONAL SRP 30 Laser Printer