Filter
Top Products
Operator’s Guide
Transport Unit at the Bottom
With the print engine pulled out:
1. Release the two locking levers (1) and pull the transport unit out on the
telescopic rails.
2. Open the lever (2) and hold it against the unit as the bottom part of the transport
releases.
3. Pull the flap (3) up and slowly lower the bottom part of the transport unit.
4. Remove the jammed paper from the paper transport.
5. Return the flap (3) to the operating position.
CAUTION: The flap (3) must be flush to the side of the transport before you
close the lever (2).
7-12 KODAK PROFESSIONAL SRP 30 Laser Printer