Filter
Top Products
Operator’s Guide
4. The lamp mount (1) is secured to the holder by magnets. Pull the lamp mount (1)
out of the holder and remove the old lamp with a clean cloth.
5. Check the lamp socket (2).
a. If the lamp socket or the contacts show burning stains caused by heat, this
indicates contact problems that may have a negative impact on the print
result.
b. If required, have the lamp socket replaced by a service technician.
CAUTION: To avoid fingerprints, do not touch the lamp with your bare
hands. Use the protective foil that comes with the lamp or a lint-
free cloth.
6. Install the new lamp in the lamp mount.
8-38 KODAK PROFESSIONAL SRP 30 Laser Printer