Filter
Top Products
Operator’s Guide
CCD Fan
The CCD (1) fan pulls air in through the film chute and circulates it to the electronic
component area.
1. Loosen the knurled screw (2).
2. Remove the cover.
3. Wash the filter mat in water.
4. Reinstall the filter mat.
Under the Cutter Unit
1. Remove the cover (1).
2. Wash the filter mat in water.
3. Reinstall the filter mat.
NOTE: Observe the correct position. The smooth side should point to the grid.
4. Mount the cover.
8-34 KODAK PROFESSIONAL SRP 30 Laser Printer