Filter
Top Products
Operator’s Guide
1
2
4. Release the quick-action locks (1) and remove the guide plate (2).
5. Remove the paper.
6. Install the guide plate. Check that it sits correctly in the holders and that the
quick-action locks are locked.
Paper Jams in the Lane Distributor
2
1
3
1. Open the right-hand printer door.
2. Loosen the red locking screw (1) and pull the lane distributor out on the
telescopic rails.
3. Release the quick-action locks (2) and remove the guide plates (3).
4. Remove the paper.
5. Install the guide plates. Check that they sit correctly in the holders and that the
quick-action locks are locked.
7-18 KODAK PROFESSIONAL SRP 30 Laser Printer