Konica Minolta 350 All in One Printer User Manual


 
5
Scan to SMB
5-26 200/250/350
Scan to SMB Chapter 5
5.4 If transmission could not be completed
If the transmission could not be completed correctly, a transmission report
is printed.
!
Detail
You can change the transmission report printing conditions. For details,
refer to “Specifying the transmission report printing conditions (Report
Settings)” on page 9-18.
Viewing a transmission report
The following document has not been transmitted. Try to retransmit.
P. 1
(TUE) APR 19 2006 10:31
CHICAGO
User/Account :SALES
DESTINATION :NEW YORK
ADDRESS :192.168.1.111
PAGES :1page
RESULT :ED09C6
DOCUMENT# :6614316-761
TIME STORED :APR 1910:24
TX START :APR 1910:30
DURATION :6 sec
MODE :SMB
IMAGE
2
1
3
4
5
No. Item Description
1 Report output date and time Shows the date and time that the report was printed.
2 Transmission source infor-
mation (TSI)
Shows the registered transmission source name.
3 Transmission information Shows the document number, the duration of the
transmission, and the transmission mode.
4 Transmission result Shows the transmission result. Any of the following
may appear.
OK: The transmission was completed successfully.
INTERR: The transmission was interrupted.
F. MEM: The memory capacity was exceeded.
NG: The transmission failed.
PT. DEL: The transmission to some destinations failed.
Error code: For details, refer to “Network error list” on
page 11-3.
5 Transmission image Shows a part of the sent image.