Filter
Top Products
8
Specifying settings using PageScope Web Connection
8-58 200/250/350
Specifying settings using PageScope Web Connection Chapter 8
8.14 TCP/IP (Administrator mode)
Specify the required settings for using this machine over a network.
If “TCP/IP” is clicked, settings can be specified for the following.
Item Description
TCP/IP [*] Select whether to enable or disable TCP/IP.
DHCP
Configuration
[*]
Select whether the DHCP server is enabled (the IP address is acquired
automatically) or disabled (a fixed IP address is specified).
IP Address [*] Specify the IP address of this machine. Specify a setting when “DHCP Con-
figuration” is set to “Disable”.
Subnet Mask [*] Type in the subnet mask of the network to be connected. Specify a setting
when “DHCP Configuration” is set to “Disable”.
Gateway
Address [*]
Type in the default gateway of the network to be connected. Specify a setting
when “DHCP Configuration” is set to “Disable”.
RAW Port [*] Select whether or not a port number is used with RAW printing.
RAW Port
Number
Specify the RAW port number. Enter the port number within the range of 1 to
65535.
Self-Domain
Name [*]
Specify the domain name of this machine. Specify this setting when
performing a direct fax transmission over a mail server. For details on
specifying the domain device settings, refer to the User’s Guide [Facsimile
Operations].
2
Note
“Self-Domain Name” and “Port Number” appear if the optional
scanner unit or fax kit has been installed.
To send a direct fax, the optional fax kit must be installed.
Port Number[*] Type in a port number between 1 and 65535 for this machine’s domain.
DNS
Configuration
Select “Yes” or “No” for the DNS (Domain Name System).
When using a DNS server within a network, select “Yes”. When not using a
DNS server within a network, select “No”.
When using an external server such as an Internet provider, select “No” if the
IP address of the mail server is public. If the DNS name of the mail server is
public and the IP address is not public, select “Yes”.
For details on the network environment, contact the network administrator.
Host Name Specify the host name of this machine.
For details on the settings to be specified, contact the network administrator.
Specify a setting when “DNS Configuration” is set to “No”.
Domain Name Specify the domain name of the DNS server.
For details on the settings to be specified, contact the network administrator.
Specify a setting when “DNS Configuration” is set to “No”.
DNS Server
Address 1 to 3
Specify the IP addresses of the DNS server.
For details on the settings to be specified, contact the network administrator.
Specify a setting when “DNS Configuration” is set to “No”.