Filter
Top Products
8
Specifying settings using PageScope Web Connection
8-56 200/250/350
Specifying settings using PageScope Web Connection Chapter 8
8.13 Report Settings (Administrator mode)
The conditions for outputting the transmission results report and activity re-
port can be specified.
Settings can be specified for the following.
Item Description
TX Report
(Single
destination)
Select the conditions for outputting the results report for a transmission to a
single destination.
Output On: Select this setting to output the report, regardless of the
transmission result.
If TX Fail: Select this setting to output the report only if the transmission failed.
Output Off: Select this setting to not output the report, regardless of the
transmission result.
TX Report
(Multiple
destinations)
Select the conditions for outputting the results report for a transmission to
multiple destinations.
Output On: Select this setting to output the report, regardless of the
transmission result.
If TX Fail: Select this setting to output the report only if the transmission failed.
Output Off: Select this setting to not output the report, regardless of the
transmission result.
Activity Report Select whether or not the activity report is outputted with every 50
transmissions.