Filter
Top Products
Specifying settings using PageScope Web Connection
8
200/250/350 8-53
Specifying settings using PageScope Web Connection Chapter 8
2
Note
If bit 7 of mode 306 is set to “1” in the Soft SW Setting screen, only “Port”
is available. For details, refer to “Specifying software switch settings (ma-
chine functions)” on page 9-29.
Specifying the processing of received documents at each line
1 In the Administrator mode, click the Scan tab.
– If the optional fax kit has been installed, click the Fax/Scan tab.
– For the procedure to log on to Administrator mode, refer to “Log-
ging on to Administrator mode” on page 8-8.
2 Click [RX Document], then [Port].
3 Click [Network].