Filter
Top Products
8
Specifying settings using PageScope Web Connection
8-44 200/250/350
Specifying settings using PageScope Web Connection Chapter 8
Specifying the transmission settings
1 In the Administrator mode, click the Scan tab.
– If the optional fax kit has been installed, click the Fax/Scan tab.
– For the procedure to log on to Administrator mode, refer to “Log-
ging on to Administrator mode” on page 8-8.
2 Click [TX Settings].
3 Specify settings for each parameter, and then click [Apply].
Com. Mode
Select whether or not each communication mode can be used.
1 In the Administrator mode, click the Scan tab.
– If the optional fax kit has been installed, click the Fax/Scan tab.
2 Click [TX Settings].
3 Click [Com. Mode].
4 Specify a setting for each parameter, and then click [Apply].