Filter
Top Products
9
Specifying management settings
9-18 200/250/350
Specifying management settings Chapter 9
9.5 Specifying the transmission report printing conditions
(Report Settings)
You can specify the printing conditions for the transmission results and ac-
tivity reports.
Settings can be specified for the following.
!
Detail
If “Activity Report” is set to “ON”, the activity report contents can be out-
putted as a CSV file and sent by e-mail to the administrator when the ac-
tivity report is printed. To manage the contents of the activity report as
data, specify the e-mail address of the administrator.
For details on the specifying the e-mail address of the administrator, refer
to the User’s Guide [Copy Operations].
Specifying TX Report settings
1 Enter Administrator mode, and then touch [Admin. 1].
2 Touch [Report Settings].
Item Description
TX Report Select to print the transmission report sent to single destinations
or broadcast.
ON: Prints regardless of the transmission results.
If TX Fails: Prints only when undeliverable.
OFF: Does not print regardless of the transmission results.
Activity Report Select whether to print the activity report automatically every 50
transmissions.
Utility/Counter
Administrator Management 1
Enter
Account/
User Auth.
Initial
Setting
Admin.Set
Print Lists
Report
Settings
TX Settings
RX Settings
Document
Management
100%
Memory
Free