Filter
Top Products
8
Specifying settings using PageScope Web Connection
8-60 200/250/350
Specifying settings using PageScope Web Connection Chapter 8
Specifying the TCP/IP settings
1 In the Administrator mode, click the Network tab.
– For the procedure to log on to Administrator mode, refer to “Log-
ging on to Administrator mode” on page 8-8.
2 Click [Common Setting], then [TCP/IP].
3 Specify a setting for each parameter, and then click [Apply].
4 If the setting of a parameter marked with [*] is changed, turn this ma-
chine off, then on again.