Filter
Top Products
Setup
2
200/250/350 2-13
Setup Chapter 2
3 Use the keypad to type in the IP address.
– You cannot specify an IP address that begins with 0, 127, or 224 or
higher.
– When less than three digits are entered, use [→] to move the cursor
to the next number.
4 Touch [Enter].
Network Board Set
Settings can be specified for the following.
Item Description
Auto Selects the transmission speed automatically by auto-negotia-
tion.
100M-Full Manually specifies a transmission speed of 100 Mbps in full-du-
plex mode when the transmission speed cannot be selected au-
tomatically.
100M-Half Manually specifies a transmission speed of 100 Mbps in half-
duplex mode when the transmission speed cannot be selected
automatically.
10M-Full Manually specifies a transmission speed of 10 Mbps in full-du-
plex mode when the transmission speed cannot be selected au-
tomatically.
10M-Half Manually specifies a transmission speed of 10 Mbps in half-du-
plex mode when the transmission speed cannot be selected au-
tomatically.