Filter
Top Products
8
Specifying settings using PageScope Web Connection
8-20 200/250/350
Specifying settings using PageScope Web Connection Chapter 8
– If mode 476 of the software switch settings was changed, only
communication modes that can be selected appear. For details, re-
fer to “Specifying software switch settings (machine functions)” on
page 9-29.
6 Specify settings for the parameters in the page for the selected com-
munication mode.
– To also register the secondary recipient, specify settings for the pa-
rameters, and then click [Sub Address Registration].
– For details on the parameters, refer to “One-Touch Key Registration
(User mode)” on page 8-11.
7 Click [Apply].
The one-touch dial destination is registered.
Registering a secondary recipient
A secondary recipient can be specified in case the transmission to the recip-
ient of the one-touch dial destination failed. The communication modes in
which a secondary recipients can be specified are “TX: PC (E-mail)” and “TX:
Internet FAX”.
0 A secondary recipient can be specified if the optional scanner unit or fax
kit is installed.
0 Any of the following communication modes can be specified for the sec-
ondary recipient.
- TX: PC (E-mail)
- TX: PC (Scanner)*
- TX: InternetFAX (E-mail)*
- TX: InternetFAX (IP-TX)*
- TX: InternetFAX (IP-Relay)*