Filter
Top Products
Setup
2
200/250/350 2-51
Setup Chapter 2
3 Touch [Enable] or [Disable].
4 Touch [1] of the range.
5 Touch [Start], and then type in the IP address at the beginning of the
range.
– To change an entered value, touch [←] and [→] to move the cursor
to the number to be changed, touch [Delete], and then type in the
desired number.
– To clear all entered values, press the [C] (clear) key.
6 Touch [Enter], and then touch [Enter] in the next two screens that ap-
pear.
IP filtering is specified.
1
100%
Memory
Free
Accept
Setting
Enable
Disable
Enter
Utility/Counter
Enter the IP Address range to permit
access.
Cancel
. . . - . . .
2
. . . - . . .
3
. . . - . . .
Set the IP Address.
Utility/Counter
Permit
Delete
...
Start
EnterCancel
...
End
100%
Memory
Free