Filter
Top Products
A: Resetting to Factory Defaults
You may reset the non-volatile RAM that stores all configurable options. This clears
all administrator-editable fields and resets all command line configurable options to
their default values, including all user accounts.
You may reset the unit to factory defaults from the command line or the web browser
interface, or by pressing the reset button. You must have administrator-level
privileges to issue the command. Using the reset button may be necessary when a
forgotten password prevents administrator login. Each of the methods updates the
current working configuration to the factory defaults.
Note: Resetting the unit resets all TCP/IP and Telnet/Web configurations.
Reconfiguring the TCP/IP and Telnet/web settings will be required.
To reset to factory defaults from the web browser interface
1. On the Restart page in the Tools section of the web browser interface, select
Restart and reset to factory defaults from the drop-down menu and press Apply.
To reset to factory defaults from the command line
1. At the command prompt, type restart factory and press Enter.
To reset to factory defaults using the reset button
1. Locate the recessed reset button directly beside the Serial & Ethernet ports. You
will need a non-conductive, non-metallic tool that fits inside the recess.
2. Insert the tool in the recess, then depress and hold the reset button for at least
ten seconds.
Note: If the reset button is depressed and held for more than 15 seconds, the reset
will abort.
SecureLinx SLP Remote Power Manager 99