Filter
Top Products
4: Advanced Operations
Email
Email Command Summary
Command Description
Set Email Enables or disables Email notification support
Set Email SMTP Host Sets the SMTP Host IP address or hostname
Set Email SMTP Port Sets the SMTP server port number
Set Email From Sets the email ‘From’ address
Set Email PrimaryTo Sets the primary recipient email address
Set Email SecondaryTo Sets the secondary recipient email address
Set Email Event Enables or disables notification of general system events
Set Email Auth Enables or disables notification of all authentication attempts
Set Email Power Enables or disables notification of power state change requests
Set Email Config Enables or disables notification of configuration changes
Show Email Displays all Email configuration information
Enabling or disabling Email notification Support:
The Set Email command enables or disables Email notification support.
To enable or disable Email notification support:
At the SLP: prompt, type set email, followed by enabled or disabled and press
Enter.
Setting the SMTP server address:
The Set Email Host command sets the IP address or hostname of the SMTP server.
To set the SMTP server address:
At the SLP: prompt, type set email smtp host, followed by the SMTP server’s IP
address or hostname and press Enter.
Examples
The following command sets the SMTP server address to 55.55.55.55:
SLP: set email smtp 55.55.55.55<Enter>
The following command sets the SMTP server address to email.lantronix.com:
SLP: set email smtp email.lantronix.com<Enter>
Changing the SMTP server port:
With SMTP support enabled, the SLP sends SMTP requests to the default SMTP
port number 25. This port number may be changed using the Set Email SMTP Port
command.
To change the TACACS port:
At the SLP: prompt, type set email smtp port, followed by the port number and
press Enter.
Example
The following changes the SMTP port number to 5555:
SecureLinx SLP Remote Power Manager 95