Filter
Top Products
3: Operations
Changing the LDAP server port:
1. Enter the port number in the LDAP Port field and press Apply.
Setting the LDAP server address:
1. Enter the IP address or hostname in the Primary and/or Secondary Host field and
press Apply.
Note: If LDAP over TLS/SSL is enabled, MD5 binding is disabled.
Enabling or disabling LDAP over TLS/SSL:
1. Select Yes or No from the Use TLS/SSL drop-down menu and press Apply.
Setting the LDAP bind password type:
1. Select Simple or MD5 from the Bind Type drop-down menu and press Apply.
Note: If MD5 binding is enabled, LDAP over TLS/SSL is disabled.
For more information on LDAP bind password types, see Setting the LDAP bind
password type on page 79.
Setting the search bind Distinguished Name (DN):
1. Enter the fully-qualified distinguished name (FQDN) in the Search Bind field and
press Apply.
Setting the search bind password for Distinguished Name (DN):
1. Enter the Search Bind password in the Search Bind Password field and press
Apply.
Setting the user search base Distinguished Name (DN):
1. Enter the User Search Base DN in the User Search Base DN field and press
Apply.
Setting the user search filter:
1. Enter the User Search Filter in the User Search Filter field and press Apply.
Setting the group membership attribute:
1. Enter the group membership attribute in the Group Membership Attribute Field
and press Apply.
Setting the group membership value type:
1. Select the appropriate value from the drop-down menu and press Apply.
Configuring the authentication order:
1. Select Remote -
>
Local or Remote Only from the drop-down menu and press
Apply.
Note: Lantronix recommends NOT setting the authentication order to
Remote Only until the LDAP has been fully configured and tested.
SecureLinx SLP Remote Power Manager 28