Filter
Top Products
2: Installation
The following network defaults allow unit configuration out-of-the-box through either
Telnet/SSH or via a web browser:
IP address: 192.168.1.254
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
The local PC network connection must be configured as Noted below:
Note: Contact your system administrator for instructions in reconfiguring the
network connection. Reconfiguration of your network connection may
require a restart to take effect.
IP address: 192.168.1.x (where x is 2-253)
Subnet Mask: 255.255.255.0
SecureLinx SLP Remote Power Manager 13