Filter
Top Products
3: Operations
You may enter commands in any combination of uppercase and lowercase. You
must enter all command characters correctly; there are no command abbreviations.
There are two types of commands: operations and administration. A user must have
administrative privileges to use the administration commands. The following tables
list and briefly describe each command.
Table 3-2. Operations Command Summary
Command Description
On Turns one or more outlets on
Off Turns one or more outlets off
Reboot Reboots one or more outlets
Status Displays the on/off status of one or more outlets
ILoad Displays the total cumulative input load
IStat Displays the status of the infeed
Connect Connect to the serial port
Login Ends the current session and brings up the Username prompt
Logout Ends a session
Password Changes the password for the current user
Quit Ends a session
List Outlets Lists all accessible outlets for the current user
List Ports Lists all accessible serial/Pass-Thru ports for the current user
List Group Lists all assigned outlets for a group name
List Groups Lists all accessible groups for the current user
Table 3-3. Administrative Command Summary
Command Description
Add Grouptouser Grants a user access to one or more groups
Add Outlettogroup Adds an outlet to a group name
Add Outlettouser Grants a user access to one or all outlets
Add Portuser Grants a user access to one or all serial/Pass-Thru ports
Create Group Adds a group name
Create User Adds a user account
Delete Groupfromuser Removes access to one or more groups for a user
Delete Outletfromgroup Deletes an outlet from a group name
Delete Outletfromuser Removes access to one or all outlets for a user
Delete Portfromuser Removes access to one or all serial/Pass-Thru ports
List User Displays all accessible outlets/groups for a user
List Users Displays privilege levels for all users
Remove Group Deletes a group name
Remove User Deletes a user account
Restart Performs a warm boot
Set Banner Set the pre-login banner text
Set DHCP Enables or disables DHCP support
Set DNS Sets the IP address of the Domain Name server
Set FTP Autoupdate Enables or disables automatic FTP update support
Set FTP Autoupdate
Day
Sets the automatic FTP update day
SecureLinx SLP Remote Power Manager 34