Filter
Top Products
1: Introduction
The Lantronix SLP Remote Power Manager family of products provides easy,
practical, and secure solutions for power distribution, power management and load-
measurement for remote equipment and branch AC circuits.
The SLP Remote Power Manager supports the elimination of unnecessary trips to
remote locations by allowing remote control of the power on/off status for distant
critical equipment, minimizing the impact of locked-up devices on mission-critical
systems.
Features and Benefits
SLP models are available in 8-outlet and 16-outlet configurations for 100-120VAC
and 208-240VAC up to 16A. Expansion models are available in 8-outlet and 16-
outlet configurations for 100-120VAC and 208-240VAC up to 16A. See
Models on
page
101.
Communication Access Modes
All models are equipped standard with a RS-232 (serial) port and a 10/100 Base-T
Ethernet port for Telnet, Secure Shell (SSH), and web browser access.
Power Distribution
Up to 16A/24A of AC power (dependant on model) can be distributed across up to
sixteen attached devices. See
Models on page 101 for available models.
Remote Power Management
Remote control of power outlets allows individual on/off and reboot control of up to 16
devices or up to 32 devices with the addition on an expansion unit.
Load and Environment Measurement
Load measurement eliminates guesswork by supplying the cumulative operating load
in amperes. This allows on-site technicians to maximize the equipment installed and
operated on a circuit without concern. Use of the circuit is maximized, while
effectively allowing a 10% to 20% safety margin. Remote users also may access this
information at any time from the command line or web browser interface.
Optionally, temperature and humidity sensors allow monitoring of key environmental
conditions at remote facilities.
Power-up Sequencing
SecureLinx SLP Remote Power Manager 7