Filter
Top Products
3: Operations
4. On the subsequent LDAP Group-Outlets page, select or deselect outlets to be
accessed by the TACACS+ Privilege Level and press Apply.
Adding and Deleting outlet group access:
3. Click on the Outlets link in the Action column for the associated TACACS+
Privilege Level.
4. On the subsequent LDAP Group-Groups page, select or deselect outlet groups
to be accessed by the TACACS+ Privilege Level and press Apply.
Adding and Deleting serial port access:
3. Click on the Ports link in the Action column for the associated TACACS+
Privilege Level.
4. On the subsequent LDAP Group-Ports page, select or deselect ports to be
accessed by the TACACS+ Privilege Level and press Apply.
Email
The Email configuration page is used for setup and maintenance of Email log
support. For additional information and configuration requirements for Email support,
see
Logging on page 93.
Enabling or disabling Email support:
1. Select Enabled or Disabled from the Email Notifications drop-down menu and
press Apply.
Setting the SMTP server address:
1. Enter the IP address or hostname in the SMTP Host field and press Apply.
Changing the SMTP server port:
1. Enter the port number in the SMTP Port field and press Apply.
Setting the ‘From’ email address:
1. Enter the ‘from’ email address in the ‘From’ Address field and press Apply.
Setting the ‘To’ email address:
1. Enter the ‘to’ email address in the ‘Send To’ Address field and press Apply.
Enabling or Disabling event type notifications:
1. Select Enabled or Disabled from the Include…Messages drop-down menus and
press Apply.
Tools
The Tools section contains access to rebooting the unit, uploading new firmware as
well as resetting the unit to factory defaults. This section is available to
administrative level users only.
SecureLinx SLP Remote Power Manager 31