Filter
Top Products
1 Adapter
2 Rear adapter retention bracket
3 Front adapter retention bracket
8. Connect all required cables to the adapter. Route cables so that they do not
block air flow from the fans.
9. Rotate the rear and front adapter-retention brackets to the closed position.
10. Close the bezel.
Install the side cover (see “Installing the side cover” on page 134).
Lock the side cover.
Reconnect the external cables and power cords; then, turn on the attached
devices and turn on the server.
If you have other options to install or remove, do so now; otherwise, go to
“Completing the installation” on page 130.
Installing a second microprocessor
The following notes describe the type of microprocessor that the server supports
and other information that you must consider when installing a microprocessor:
v The server comes with one microprocessor installed, but supports up to two
microprocessors.
Note: A microprocessor must be installed and removed only by a trained service
technician.
v To download the most current level of the firmware for your server, do the
following:
1. Go to: http://www.lenovo.com/support.
2. Enter your product number (machine type and model number) or select
Servers and Storage from the Select your product list.
3. From Family list, select ThinkServer TD200, and click Continue.
4. Click Downloads and drivers to download firmware updates.
Chapter 5. Installing optional devices and replacing customer replaceable units 99