8
Chapter 4: Getting Started
Overview
IP Telephony System
Chapter 4: Getting Started
Overview
For first-time installation of the System, Linksys strongly recommends using the Setup Wizard, which you can
download from www.linksys.com. For advanced users, you may follow the instructions in this chapter, and then
use the Web-based Utility for additional configuration (refer to “Chapter 6: Using the Web-based Utility”). To use
the Interactive Voice Response Menu, proceed to “Chapter 5: Using the Interactive Voice Response Menu.”
Before You Begin
Make sure you have the following:
• IP Telephony System (model number: SPA9000)
• One or more Internet phones (for example, Linksys SPA-family IP Phones, model number: SPA941)
• A router and cable/DSL modem (or gateway)
• One or more Ethernet network switches (so you can connect Internet phones or computers)
• At least one active Internet phone service account and its settings if you want to make external calls
• An active Internet connection if you want to make external calls
• At least one computer for configuration of the System and Internet phones
• Two or more Ethernet network cables
• Analog telephones or fax machines (optional)
Figure 4-1: A Typical Scenario for the IP Telephony
System
NOTE: For best results, use a switch that offers QoS (Quality of Service) and full wire-speed
switching. QoS enables the switch to give top priority to voice traffic, while full wire-speed
switching lets it forward packets as fast as your network can deliver them. The next best
choice is a QoS (Quality of Service) switch.
SPA941
Cable/DSL Modem
Analog
Phone
Internet
Desktop
Computer
Switch
SPA941
Administration
Computer
Fax
SPA941
Router
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560