85
Appendix B: Configuring the Nighttime Auto-Attendant
Instructions for Setting Up the Nighttime Auto-Attendant
IP Telephony System
Configuring the Auto-Attendant Settings
To configure the nighttime auto-attendant, follow these instructions:
1. Launch Internet Explorer or Netscape Navigator on the administration computer.
2. Enter <IP address of the System>/admin/voice/advanced in the web browser’s Address field. (Enter the
IP address you assigned to the System when you installed it.)
Then press the Enter key.
3. The Voice - Info screen will appear. Click the SIP tab.
4. On the SIP screen, scroll down to the Auto Attendant Parameters.
5. For the AA script 2 field, follow these instructions:
a. Copy the default AA script 1 text to the Notepad (or other word processing program).
This is the default AA script 1 code:
<aa>
<form id="dir" type="menu">
<audio src="prompt1" bargein="T"/>
<noinput timeout="10" repeat="T"/>
<nomatch repeat="F">
<audio src="prompt3" bargein="T"/>
</nomatch>
<dialplan src="dp1"/>
<match>
<default>
<audio src="prompt2"/>
<xfer name="ext" target="$input"/>
</default>
</match>
</form>
</aa>
Figure B-2: Voice - SIP Screen - Auto Attendant
Parameters
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560